Product Description
The ceiling plate for this mount swivels a full 90 degrees. This allows you to place the plate IN your ceiling and mount it to the side of a ceiling beam. The pole then drops from the plate and passes through a 2.5-Inch hole that is cut in the drywall of the ceiling. When you look at the ceiling you will see no more than a 2.5-Inch hole with the ceiling mount pole extended down. With cable management ability, the poles conceal all wires and cables. This same mount also accommodates vaulted and angled ceilings. This is a complete kit including the ceiling plate, extension pole, TV mount, TV mount adapter, installation instructions and all necessary hardware. The APLCMB is the best ceiling mount available on Ebay for Flat Panel TV’s at an affordable cost.
- Swivel ceiling plate supports vaulted ceilings and side ceiling stud install
- Universal design that fits 32-55" displays up to 165LBS
- Provides 360 degree Rotation and 15 degree tilt
- Includes pole extending 41"-64" From the Ceiling
- Installation Manual and all Hardware Included
Cheetah Mounts APLCMB Plasma LCD TV Tilt And Swivel Ceiling Mount for 32 to 63-Inch (Black) Reviews
Cheetah Mounts APLCMB Plasma LCD TV Tilt And Swivel Ceiling Mount for 32 to 63-Inch (Black) Reviews
28 of 34 people found the following review helpful WOW : (, By Randa "mom2imnel" (Wisconsin) - See all my reviews This review is from: Cheetah Mounts APLCMB Plasma LCD TV Tilt And Swivel Ceiling Mount for 32 to 63-Inch (Black) (Electronics) Ok I don't know where to start, as far as pieces go everything ever needed is included as far as mounting different Tv's. The top bracket tilts for use on a vaulted ceiling however you can't get the screw tight enough to stop the tilt, which makes the tv look like it's taking a nose dive. The joint where the bars meet the swival bar is for junk, it bends alot at this joint, and no it's not supposed to bend. It hooks to the tv wonderfully, however the tv seams a little top heavy. We have the back bracket up all the way (on our 50 inch tv) there is a tilt divice but it is NOT needed because the tv tilts/pulls away from the top of the bar. The bar is in no way straight up and down. The tv sits at a tilt of more than 15 degrees without the tilt device tilted any. The 360 degree swival works but as you turn the tv around the bar freaks out and makes you think the tv is going to hit the floor. I would not purchase this again, and now we have nothing to hang our Tv. I guess the... Read more 6 of 6 people found the following review helpful poorly designed mount, Amazon Verified Purchase This review is from: Cheetah Mounts APLCMB Plasma LCD TV Tilt And Swivel Ceiling Mount for 32 to 63-Inch (Black) (Electronics) I was replacing my 42 inch Panasonic plasma TV to a new Samsung LED TV. Because I needed to lower the TV about 12 inches, I purchased this mount. The Ceiling mount is worthless for mounting in a single 2x8 ceiling stud because they designed it with 4 holes that are stupidly 4 inches apart. This wouldn't even work for a double stud! I mounted mine diagonal using only 2 of the holes. There are 2 machine screws to hold the extension to the ceiling plate and four more to hold the TV mount to the extension but only ONE LOUSY BOLT for a friction plate that keeps the whole thing from crashing down!!!! 6 of 6 people found the following review helpful too large/long to use for home, Amazon Verified Purchase This review is from: Cheetah Mounts APLCMB Plasma LCD TV Tilt And Swivel Ceiling Mount for 32 to 63-Inch (Black) (Electronics) We bought this mount to hang the TV in the media room. The problem is it was entirely too large/long to use for home. The main shaft is so long the LCD HDTV would be at the level of my waist/knees. There is no way to adjust it to the right height. I had to take it to a hardware store, and cut it short. |
› See all 10 customer reviews...
0 ความคิดเห็น:
Post a Comment